Garmin Fishfinder 340C Owner's Manual

Also see for Fishfinder 340C: Quick reference Owner's manual Install guide Declaration of conformity Owner's manual

Garmin Fishfinder 340C Owner's Manual Manual pdf 47 page image

Fishfinder 340C Owner’s Manual 4usIng the fIshfInder 340c > MArkIng A WAyPoIntTo mark an underwater waypoint:1. Make sure that your Garmin GPS or compatible NMEAnavigation device is properly attached and theNMEA Input/Output is On (see page 32).2. From a Sonar Page, press and hold PAUSE to enter Pointermode and pause the screen movement.3. Use the ROCKER to move the cursor onto the target (forexample, an underwater drop off or stump) that you want tomark. Data appears with the GPS coordinates, depth, andsurface temperature for that location.4. Press ENTER. The New Waypoint Window appears witha default four-digit name and the pointer’s coordinatesautomatically filled in.5. To change the name, highlight the name field, and pressENTER.6. Make your changes using the ROCKER. (Alphabetic andnumeric characters are available.) Press ENTER when youare finished.7. Use the ROCKER to move the field highlight to OK, andpress ENTER. The Fishfinder then sends a NMEA WPLsentence to an attached GPS unit or NMEA navigationaldevice.