Garmin Fishfinder 140 Owner's Manual

Also see for Fishfinder 140: Owner's manual Install guide Owner's manual Declaration of conformity Manual

Garmin Fishfinder 140 Owner's Manual Manual pdf 16 page image

10 Fishfinder 90/140 Owner’s ManualInstalling Your FishfinderOKLevelDrill pilot holes here.VerticalBottom of the transomAlign with thetransom bottom. Thetransducer shouldextend 1/8" belowfiberglass hulls or3/8" below aluminumhulls.Keep it parallel with the water line.Installing the Fishfinder UnitSelecting a Fishfinder installation LocationSelect a Fishfinder installation location that allows you toview and operate it easily while operating the vessel. Selecta mounting surface strong enough to support the weightof the Fishfinder and protect it from excessive vibration orshock. DO NOT mount the bracket in a location where theFishfinder is exposed to extreme temperature conditions.When installing the mounting bracket, be sure to allowroom to connect and rout the power cable.Mounting the Bracket AssemblyTool List (not included)—drill, screwdriver (Phillips orstandard), three #8 pan-head machine bolts with matchingnuts and washers, and a 5/32" drill bit; or three #8 pan-head,self-tapping screws and a 1/16" drill bit.190-00582-10_0A.indd 10 12/2/2011 3:08:58 PM