Garmin BMW Motorcycles Navigator Owner's Manual And Reference Manual

Garmin BMW Motorcycles Navigator Owner's Manual And Reference Manual Manual pdf 19 page image

17To mark your current location on the Map Page and save as a waypoint:1. Press and hold the ENTER key for approximately two seconds. A ‘ Waypoint Marked’ page willappear with a pre-assigned name, symbol, position and elevation for the new waypoint. When the‘Waypoint Marked Page’ appears, the waypoint is marked.2. The Navigator will automatically assign a three-digit number as the waypoint name, but you mayselect any name you want, up to ten characters in length. To change the name, highlight the identifierfi eld, press ENTER and use the ROCKER KEYPAD to enter the desired waypoint name. PressENTER once all characters for the waypoint name have been entered.3. To select a different waypoint symbol, which will appear on the map, highlight the symbol fieldand press ENTER. A list of available symbols will appear. Use the ROCKER KEYPAD to select thedesired symbol and press ENTER.4. You can route to the waypoint, show it on the map page, or delete it. Use the ROCKER KEYPAD toselect the option you desire and press ENTER.Routing to a Map Feature or Location1. Use the ROCKER KEYPAD to move the arrow to the desired feature or location on the map.2. Press ENTER to display detailed information about the item.3. To route to the location on the map, select ‘Route to It’ on the information page for that itemand press ENTER. The ROUTE preference window appears. Select Faster Time, Shorter Distance,or Off Road, and press ENTER. The Navigator will route you to the selected destination usingturn-by-turn navigation and voice prompting.ReferenceThe Map PageOnce you have marked a waypoint, you can route to it,show it on the map, or delete it.You can mark your current position from any page, notjust the Map Page.