Garmin 500W Series Quick Reference

Also see for 500W Series: Pilot's guide addendum Pilot's guide addendum Pilot's Guide & Reference Instructions Manual

Contents

Garmin 500W Series Quick Reference Manual pdf 17 page image

15190-00357-01 Rev HTo Create a New Flight Plan1. Press FPL and turn the small right knob to displaythe Flight Plan Catalog.2. Press MENU to display the Flight Plan CatalogOptions.3. Turn the large rightknob to highlight “CreateNew Flight Plan?” andpress ENT.4. A blank flight plan pagewill appear for the firstempty storage location.Use the small and largeright knobs to enter theidentifier of the departurewaypoint and press ENT.5. Repeat step #4 above toenter the identifier for eachadditional flight plan waypoint.6. Once all waypoints have been entered, press thesmall right knob to return to the Flight PlanCatalog.To Navigate a Flight Plan1. Press FPL and turn the small right knob to displaythe Flight Plan Catalog.2. Press the small rightknob to activate thecursor.3. Turn the large rightknob to highlight thedesired flight plan andpress MENU to displaythe Flight Plan Catalog Options.4. Turn the large right knob to highlight “ActivateFlight Plan?” and press ENT.To Stop Navigating a Flight Plan1. Press FPL. The Active Flight Plan Page willappear.2. Press MENU to display the Active Flight PlanOptions.3. Turn the large right knob to highlight “DeleteFlight Plan?” and press ENT.4. Press ENT again to confirm.To Edit a Flight Plan1. Press FPL and turn the small right knob to displaythe Flight Plan Catalog.2. Press the small right knob to activate thecursor.3. Turn the large right knob to highlight the desiredflight plan and press ENT.4. To add a waypoint to the flight plan: Turn the largeright knob to select the point where you wish toadd the new waypoint. (If an existing waypointis highlighted, the new waypoint will be placeddirectly in front of this waypoint.) Use the smalland large right knobs to enter the identifier ofthe new waypoint and press ENT.5. To delete a waypoint from the flight plan: Turnthe large right knob to select the waypoint youwish to delete and press CLR to display a “removewaypoint” confirmation window. With “Yes?”highlighted, press ENT to remove the waypoint.6. Once all changes have been made, press the smallright knob to return to the Flight Plan Catalog.FLIGHT PLANS