Gardena 4000/5 Inox Operating Instructions Manual

Contents

Gardena 4000/5 Inox Operating Instructions Manual Manual pdf 4 page image

11GBWhen connecting the pump to the water supply system,the country-specific sanitary regulations must be observedto prevent water not of drinking water quality being drawnback in.➔ If necessary, contact your sanitary expert.The pump is automatically switched off on overheating bythe built-in thermal motor protector. After having cooled down,the motor automatically switches on again (see 6. Trouble-Shooting).3. Initial OperationThe pump fitting is equipped with a 33,3 mm (G 1”) thread towhich 13 mm (1/ 2 ”), 19 mm (3 /4 ”) and 15 mm (5 /8 ”) hoses canbe connected by using GARDENA hose connection systemfittings.1. Screw the pump fitting 1 onto the outlet of the pump andtighten it manually until the washer fits closely.2. Attach the hose to the pump fitting 1.Best results in delivery capacity of the pump are achievedwhen using 19 mm (3 /4 ”) hoses in conjunction with GARDENA“Profi” Maxi-Flow System fittings (e.g. Art. No. 1752) or25 mm (1”) hoses with fittings available at your sanitary dealer.When connecting simultaneously several hoses / accessories, werecommend to use either our GARDENA Twin-Tap Connectoror our Four Channel Water Distributor (Art. No. 1210 / 1194)which can be directly screwed onto the pump fitting 1.v Fasten the fastening rope 2 to the loop 3 for fastening rope.4. OperationTo ensure that the pump draws the water out, the water to bedrained must be at least 20 cm deep.1. Submerge the pump in the well or other water reservoirs,using the fastening rope 2.In order to avoid contaminations, the pump should not beplaced directly on the ground. It must hang freely min. 30 cmabove ground.2. Secure the fastening rope 2.3. When using the pump in deep wells or shafts (ot more thanapprox. 5 m), the power cable 4 is to be guided by meansof clamps alongside the fastening rope 2.4. Plug the power cable 4 into a mains socket.Connecting the hose :Tie the fastening ropeto the pump :Thermal motor protector13224