Gaggia BESANA User Manual

Also see for BESANA: User manual User manual

Gaggia BESANA User Manual Manual pdf 14 page image

14Heating up the machineDuring the initial heat-up process, fresh water flows through the internal circuit toheat up the machine. This takes a few seconds.1 Place a bowl under the hot water/steam wand or classic milk frother and thecoffee spout. Make sure the control dial points to the coffee bean icon.2 Press the on/off button.3 When the warning light flashes quickly, turn the control dial to the hot watericon and wait a few seconds.- The warning light goes out and some water comes out of the hot water/steam wand or classic milk frother.4 After a few seconds, when hot water stops coming out of the hot water/steamwand and the warning light flashes slowly, turn the control dial back to thecoffee bean icon.- The machine is heating up and the on/off button flashes slowly.- When the machine has heated up, it performs an automatic rinsing cycle toclean the internal circuit with fresh water. Water flows from the coffee spout.- When the on/off button lights up continuously, the machine is ready for themanual rinsing cycle.Note: You can stop the automatic rinsing cycle by pressing the espresso button orthe regular coffee button.Note: The automatic rinsing cycle also takes place 15 minutes after the applianceswitches to standby mode or switches off.14 ENGLISH4219-465-00621 MANUAL GAG. BESANA HD8651 EN-FR-ES 120US.indd 14 14/10/2019 09:21:17