Gaggenau RW 464 Operating Instructions Manual

Also see for RW 414: Installation instruction Installation instruction Installation instructions Installation instructions Installation instruction

Contents

Gaggenau RW 464 Operating Instructions Manual Manual pdf 9 page image

9Set the languageThe display languages can be changed accordingto the table in the chapter Special functions, Setupmode.In order to change the display language:1. Press setup button μ.2. Press the selection button ¾ or ¿, until the setlanguage is displayed.3. Press the setting button @ or A , until the desiredlanguage is displayed.4. Press the setup button μ, in order to storethe settings. The set temperature is displayedagain in the display panel.Setting the temperature unitThe temperature can be displayed in degrees Celsius(°C) or degrees Fahrenheit (°F).1. Press setup button μ.The first menu (temperature unit) is displayed.2. Press the @ or A setting button in order to switchbetween degrees Fahrenheit (°F) and degreesCelsius (°C).3. Press the setup button μ, in order to storethe settings.The set temperature is displayed againin the display panel.Setting the temperatureThe temperatures in both climatic zones can be setindependently of each other from +41 °F to +68 °F.We recommend a setting of +51 °F.1. Activate setup mode with the selection button ¿.2. Select the required climatic zone.3. Set the required temperature with the @ (warmer)or A (cooler) setting buttons.Setting up the brightness of thedisplayYou can specify how bright the display should appearwhen the door is closed.1. Open the door.2. Press the light switch 1 and keep it pressed.3. Use the +/– buttons to adjust the brightness.4. Release the light switch 1.5. Close the door.The display will have the specified brightness.