10Ice and Water Dispenser ControlsSwitching the Appliance OnSwitch the appliance On with the POWER Button ÿ.The appliance begins to cool. Light turns on whenthe door is open., CAUTION:Keep hands and fingers away from front and rearopenings of the freezer door or freezer drawer whenclosing. Risk of injury to hands or fingers.Never allow children to climb on or play withthe freezer door.Operating Tips▯ When the appliance has been switched on, it maytake several hours until the set temperature isreached.▯ The fully automatic No Frost system ensures thatthe Freezer Compartment remains free of ice.Defrosting is not required.Setting the LanguageThe Display Languages can be changed accordingto the table in the chapter “Special Functions”,section “Setup Mode”.To change the Display Language:1. Press the SETUP Button μ.2. Press the ¾ or ¿ Selection Button, until the setlanguage is displayed.3. Press the @ or A Setting Button, until the desiredlanguage is displayed.4. Press the SETUP Button μ, in order to storethe settings.The set temperature is displayed again on theDisplay Panel.Setting the Temperature UnitThe temperature can be displayed in degreesCelsius (°C) or degrees Fahrenheit (°F).1. Press the SETUP Button μ.The first menu (Temperature Unit) is displayed.2. Press the @ or A Setting Button in orderto switch between degrees Fahrenheit (°F) anddegrees Celsius (°C).3. Press the SETUP Button μ, in order to storethe settings.The set temperature is displayed again on theDisplay Panel.Setting the TemperatureFreezer Compartment(can be selected from +7 °F (-14 °C)to –9 °F (-23 °C))We recommend a setting of 0 °F (-18 °C).1. Press the ¾ Selection Button.2. Set the temperature with the @ (warmer) or A(cooler) Setting Buttons.Water Dispense Button.Ice Cube Dispense Button.Crushed Ice Dispense Button.Lock Button for the Ice and WaterDispenser Control Panel (childprooflock).To lock and unlock, hold down thebutton for 3 seconds.Switch light with low brightness On andOff.Switch light with full brightness On andoff.