GE Profile J2B918 Installation & Owner's Instructions

Also see for Profile J2B918: Dimensions and installation information Installation & owner's instructions Installation & owner's instructions Installation and owner's manual

Operating Instructions Safety InstructionsInstallation InstructionsTroubleshooting TipsConsumer Support30The oven door must be closed and all controls set correctly for the cycle to work properly.How to Delay the Start of CleaningMake sure the clock shows the correcttime of day.Touch the SELF CLEAN pad.Using the number pads, enter thedesired clean time.Touch the DELAY START pad. Theearliest start time you can set willappear in the display.Using the number pads, enter thetime of day you want the clean cycleto start.Touch the START pad.The door locks automatically. The displaywill show the start time. It will not bepossible to open the oven door until thetemperature drops below the locktemperature and the LOCKED DOOR lightgoes off.When the LOCKED DOOR light is off, openthe door.After a Clean CycleYou may notice some white ash in theoven. Wipe it up with a damp cloth afterthe oven cools.If white spots remain, remove them with asoap-filled scouring pad and rinse thoroughlywith a vinegar and water mixture.These deposits are usually a salt residuethat cannot be removed by the clean cycle.If the oven is not clean after one cleancycle, repeat the cycle. You cannot set the oven for cooking untilthe oven is cool enough for the door tounlock. While the oven is self-cleaning, you cantouch the CLOCK pad to display the timeof day. To return to the clean countdown,touch the COOKING TIME pad. If the shelves become hard to slide,apply a small amount of vegetable oil orcooking oil to a paper towel and wipethe edges of the oven shelves with thepaper towel.Using the self-cleaning upper oven.