GE Profile 162D9617P008 Owner's Manual

Also see for Appliances 30: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

18Customer Service Troubleshooting TipsOperating Instructions Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsCustomer Service Troubleshooting Tips Installation InstructionsSafety InstructionsOperating InstructionsReplacing the light bulbs.Turning the control to the OFF or position does not remove power to the light circuit.Fresh Food Compartment—Upper LightUnplug the refrigerator.To align the control knobs properly,note position of each knob for properreassembly, move both knobs all the wayto the left, then pull them off.To remove the light shield, pull itstraight out.After replacing with an appliance bulb of thesame or lower wattage, reinstall the light shield.Replace the control knobs, move them to theirprevious settings and plug the refrigerator back in.321FREEZERTEMPERATURECOLDOFFCOLDEST135 * 79FRESH FOODTEMPERATURECOLDCOLDEST135 * 79Profile*INITIAL TEMPERATURE SETTINGSALLOW 24 HRS. FOR TEMP. TO STABILIZEFresh Food Compartment—Two Lower Lights (on some models)These lights are located behind the top drawer.Unplug the refrigerator and remove thetop drawer and cover.Grasp the bottom of the light shieldand pull it forward and up to free itsbottom edge.After replacing with an appliance bulb of thesame or lower wattage, reinstall the light shield,drawer and cover and plug the refrigeratorback in.21Freezer Compartment—Non-Dispenser ModelsUnplug the refrigerator.Remove the shelf just below light shield.Pull the plastic light shield, which isunderneath the ice compartment,toward you.After replacing with an appliance bulb of thesame or lower wattage, reinstall the shield andshelf, and plug the refrigerator back in.321Freezer Compartment—Dispenser ModelsUnplug the refrigerator.Remove the ice storage bin.Remove screw at top of light shield.After replacing with an appliance bulb of thesame or lower wattage, reinstall the shield andice storage bin, and plug the refrigerator back in.321Screw