GE Profile 162D9617P008 Owner's Manual

Also see for Appliances 30: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Customer ServiceTroubleshooting TipsOperating InstructionsSafety InstructionsInstallation InstructionsIce Storage BinTo remove:Lift the left corner to free the bin from theshelf and pull the bin straight out whilesupporting it at front and rear.To replace:Slide the bin back until the tab on the binlocks into the slot on the shelf. If the bindoes not go all the way back, remove it androtate the drive mechanism 1/4 turn. Thenpush the bin back again until the tab on thebin locks into the slot on the shelf.RotateDriveMechanismImportant Facts About Your Dispensern Add ice before filling the glass with abeverage.n Do not add ice from trays or bags tothe storage bin. It may not crush ordispense well.n Avoid overfilling glass with ice and use ofnarrow or extra-tall glasses. Backed-up icecan jam the chute or cause the door inthe chute to freeze shut. If ice is blockingthe chute, poke it through with a woodenspoon.n Beverages and foods should not bequick-chilled in the ice storage bin.Cans, bottles or food packages in thestorage bin may cause the icemaker orauger to jam.n Some crushed ice may be dispensed eventhough you selectedCUBED ICE. Thishappens occasionally when a few cubesaccidentally get directed to the crusher.n After crushed ice is dispensed, somewater may drip from the chute.n Sometimes a mound of snow will form onthe door in the ice chute. This conditionis normal and usually occurs when youhave dispensed crushed ice repeatedly.The snow will eventually evaporate.n Dispensed water is not ice cold. Forcolder water, add crushed ice or cubesbefore dispensing water.15