GE Monogram ZV48T Installation Instructions Manual

Also see for ZV30S: Installation instructions Installation instructions

Contents

GE Monogram ZV48T Installation Instructions Manual Manual pdf 7 page image

7Advance PlanningUSING DUCT COVER ACCESSORIESTo avoid unsightly gaps, plan the hood installationheight for duct cover use. Use the following formulato calculate the need for one or more duct coversand to ensure a trouble free installation.9 ft. ceilings: When the hood is installed 30"above the cooking surface, order two 12" ductcover accessories.10 ft. ceilings: When the hood is installed36" above the cooking surface, order two 12"and one 6" duct cover accessories.We recommend that the vent hood and decorativeduct cover (if used) be on site before final framing andwall finishing. This will help to accurately locate studs,ductwork and electrical service.• Read these examples carefully to determine the needfor one or more 6" or 12" duct covers.A - B = CA = Countertop to ceiling height.B = Gap at the top of the hood to the ceiling.C = Hood installation height - Plus 18" hood height.NOTE: Dim. C should be between 48" and 54" (for a30" to 36" installation height). Raise or lower the hoodinstallation height to allow use of one or more 6" and12" duct covers.8 ft. ceilings: When the hood is installed30" above the cooking surface and there isno soffit or upper cabinetry, order one 12"duct cover accessory.INSTALLATION EXAMPLES8 ft. Ceiling12"30"9 ft. Ceiling24"30"10 ft. Ceiling30"36"Ceiling HeightACB18" HoodHeight