GE JX1527CBH Install Manual

Also see for JX1527: Installation instructions Installation instructions

GE JX1527CBH Install Manual Manual pdf 1 page image

PARTS INCLUDEDNOTE: This kit has extra screws to prevent the technicianfrom spending extra time locating a replacement screwduring installation.PART QUANTITY❒ Trim Frame 1❒ Bottom Duct 1❒ Top Bracket 1❒ Bottom Bracket 1❒ Upper Duct 1❒ Rear Duct 1❒ 4 mm x 14 mm 22 requiredRound-Head 2 extraScrews❒ 4 mm x 14 mm 4 requiredFlat-Head 2 extraScrews❒ Anti-Tip Brace 1❒ Anti-Tip Bracket 1❒ Template 1READ CAREFULLY.KEEP THESE INSTRUCTIONS.Installation Built-In Trim KitsInstructions JX1527 JX15301❒ BEFORE YOU BEGINRead these instructions completely and carefully.• IMPORTANT — Save these instructionsfor local inspector’s use.• IMPORTANT — Observe all governing codesand ordinances.• Note to Installer – Be sure to leave these instructionswith the Consumer.• Note to Consumer – Keep these instructions for futurereference.• Skill level – Installation of this appliance requires basicmechanical and electrical skills.• Completion time – 1 to 3 hours• Proper installation is the responsibility of the installer.• Product failure due to improper installation is not coveredunder the Warranty.• This kit is UL/CSA listed for installation alone or over anyGE/GE Profile single electric wall oven. Not for use adjacentto (within 2 feet of) any gas or electric range, cooktopor oven.• For easier installation and personal safety, werecommend that two people install this microwave oven.• Unplug the microwave oven before attempting installationof this kit.• This kit is for use on models: PEB1590DMBB,PEB1590DMWW, PEB1590SMSS, PEB159CDNBB,PEB159CSNSS and PEB159CDNWW.• Do not alter or modify any part of this kit or the oven.WARNING — This oven must be plugged into aproperly grounded 3-hole, 120V receptacle as required bythe National Electrical Code or Canadian Electrical Code.FOR YOUR SAFETY:WARNING — Before beginning the installation,switch power off at service panel and lock the servicedisconnecting means to prevent power from being switchedon accidentally. When the service disconnecting meanscannot be locked, securely fasten a prominent warningdevice, such as a tag, to the service panel.Questions? In the U.S., call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com.In Canada, call 1.800.561.3344 or Visit our Website at: GEAppliances.ca.