GE JVM2052 Installation Instructions Manual

Also see for JVM2052: Owner's manual Owner's manual Owner's manual Installation instructions Installation instructions

GE JVM2052 Installation Instructions Manual Manual pdf 21 page image

21Installation InstructionsAttach the microwave oven to the top cabinet.Cabinet FrontCabinet Bottom ShelfFiller BlockMicrowave Oven TopEquivalent to Depthof Cabinet RecessSelf-Aligning Screw5MOUNT THE MICROWAVE OVENC4CAUTION: To avoid the risk of personalinjury (back injury or other injuries due to excessiveweight of the microwave oven) or property damage,you will need two people to install this microwaveoven.IMPORTANT: Do not grip or use handle during installation.WARNING: Risk of Electric Shock.Can cause injury or death: If installing unit with metalcountertops, cover the edge of the power supply cordhole with the power supply cord bushing.IMPORTANT: If filler blocks are not used, case damagemay occur from overtightening screws.3 Insert a self-aligning screw through top centercabinet hole. Temporarily secure the oven byturning the screw at least two full turns afterthe threads have engaged. (It will be completelytightened later.)NOTE: When mounting themicrowave oven, threadpower cord through holein bottom of top cabinet.Keep it tight throughoutSteps 1–3. Do not pinchcord or lift oven by pullingcord.Lift microwave oven,tilt it forward, and hookslots at back bottomedge onto four lowertabs of mounting plate.12 Rotate front of oven upagainst cabinet bottom.DamperUse the power supply cord clamp to bundle thepower supply cord. Install the power supply cordclamp, using a screw as shown, to the inside ofthe cabinet.4687 Tighten the two screws to the top of the microwaveoven. (While tightening screws, hold the microwaveoven in place against the wall and the top cabinet.)Insert 2 self-aligning screws through outer topcabinet holes. Turn two full turns on each screw.Install grease filter. See the Owner’s Manual packedwith the microwave oven.

/ 24

Related manuals for GE JVM2052