GE JTP90SM Datasheet

Also see for JTP90SM: Brochure

GE JTP90SM Datasheet Manual pdf 1 page image

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Revised 9/07 320142toCaOv*D2620''28''21''AFABCCONDUIT(72'' LONG)CUTOUTHEIGHT42-3/16'' MIN.42-1/4'' MAX.CUTOUTWIDTH28-1/2'' MIN.28-5/8'' MAX.Minimumcutout location21-5/8''from the floor21" MinimumDoor AllowanceJUNCTION BOXLOCATIONCABINETWIDTH30''DOOR MUST BEREMOVED BEFOREINSTALLATIONMOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.DCUTOUT DEPTH23-1/2'' MIN.ENote: Cabinets installed adjacent to wallovens must have an adhesion spec of atleast a 194°F temperature rating.Installation Information: Before installing,consult installation instructions packed withproduct for current dimensional data.Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45°and 90° walls should be placed to avoidinterference with the handle.KW Rating240V 6.4208V 5.6Breaker Size240V 30 Amps208V 30 AmpsElectric wall ovens are not approved forinstallation with a plug and receptacle. Theymust be hard wired in accordance withinstallation instructions.JTP90SMGE® 30" Built-In Double Microwave/Thermal Wall OvenDimensions and Installation Information (in inches)CL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 275 lbs.)Cabinet 30"A – Overlap of oven over side of edges of cutout 11/16"B – Overlap of oven at top and bottom of cutout 1"C – Overall of oven at top of cutout 1/2"OvenD – Overall depth* 23-1/2"E – Overall height with trim 44"Overall height without trim 43-1/2"E – Overall width 29-3/4"*Depth including door handle is approximately 26-6/10" min. to26-9/10" max.20''28''ABCCONDUIT(72'' LONG)CUTOUTHEIGHT42-3/16'' MIN.42-1/4'' MAX.CUTOUTWIDTH28-1/2'' MIN.28-5/8'' MAX.Minimumcutout location21-5/8''from the floorJUNCTION BOXLOCATIONCABINETWIDTH30''N BE USED WITH THIS UNIT.LLS MUST BE AT LEAST 28-1/2'' WIDE.DCUTOUT DEPTH23-1/2'' MIN.E

/ 2

Related manuals for GE JTP90SM