21GEAppliances.comVentFanSettingsSettingsSettingsSettingsSettingsTurntable On/OffFor best cooking results, leave the turntableon. It can be turned off for large dishes.1 Press the Settings button three times.2 Select ON or OFF as prompted.Sometimes the turntable can become too hotto touch.Be careful touching the turntable during andafter cooking.Some cooking modes do not allow theturntable to be turned off.Sound LevelUse to set the beeper volume level.1 Press the Settings button five times.2 Press 0 for mute, press 1 for low, press for normal and press 3 for loud.Display SpeedThe scroll speed of the display can bechanged.1 Press the Settings button six times.2 Press 1 for Slowest2 for Slow3 for Normal4 for Fast5 for FastestVent FanThe vent fan removes steam and othervapors from surface cooking.Press VENT FAN once for boost fan speed,twice for high fan speed, three times formedium fan speed, four times for low fanspeed or five time to turn the fan off.NOTE: The FAN indicator will be lit whilethe fan is operating.Automatic FanAn automatic fan feature protects themicrowave from too much heat rising fromthe cooktop below it. It automatically turnson if it senses too much heat.If you have turned the fan on you mayfind that you cannot turn it off. The fan willautomatically turn off when the internalparts are cool. It may stay on for 30 minutesor more after the cooktop and microwavecontrols are turned off.Display LanguageUse to select to displayed language.1 Press the Settings button seven times.2 Press 1 for English and press forSpanish..Auto Night LightThe Auto Night Light can be set to come on andgo off at desired times.1 Press the Settings button four times.2 Press 0 to turn off the Auto Night Light orpress 1 to set the Auto Night Light or press 2to review the Auto Night Light settings.3 If setting Auto Night Light, enter a valid time ofday for the Auto Night Light to turn ON.4 Select AM or PM for ON time.5 Enter a valid time of day for the Auto NightLight to turn it OFF.6 Select AM or PM for OFF time.7 Press Settings to confirm the settings entered.