GE JCBP62 Owner's Manual And Installation Instructions

Also see for ECBP82: Owner's manual

Contents

GE JCBP62 Owner's Manual And Installation Instructions Manual pdf 31 page image

TOOLS YOU WILL NEED31Installation InstructionsPREPARE TO INSTALL THE RANGEMATERIALS YOU MAY NEEDAnchor SleevesLag Bolts(For Anti-Tip Bracket Mountedon Concrete Floors Only)Adjustable WrenchLevelPhillips ScrewdriverDrill with 1/8” BitPencilSafety GlassesTape MeasureFlat-bladeScrewdriverPARTS INCLUDEDAnti-Tip Bracket KitPREPARE THE OPENINGSee illustrations for all rough-in and spacingdimensions.The range must be placed with 12 mm (1/2”)minimum clearance at the back wall and sidewalls of the cabinet.MINIMUM DIMENSIONS BETWEEN COOKTOP,WALLS AND ABOVE THE COOKTOP:*** Make sure the wall covering, countertop andcabinets around the range can withstand theheat (up to 93.3°C [200°F]) generated by therange.*** Allow 76.2 cm (30”) minimum clearancebetween surface units and bottom ofunprotected wood or metal cabinet, and38 cm (15”) minimum between countertopand adjacent cabinet bottom.*** Recommended spacing to heat-sensitivesurfaces.1Acceptable electricaloutlet area.Orient the electricalreceptacle so the lengthis parallel to the floor.7.6 cm(3″)7.6 cm(3″)19 cm(71⁄2″)63 cm(25″)76.2 cm(30″)91.4 cm(36″)*12 mm(1⁄2″) min.**38 cm(15″) min.**76.2 cm(30″) min. ***14.25 cm(6″) min.*12 mm(1⁄2″) min.