GE JBP70BKBB Owner's Manual

Also see for JBP64: Owner's manual Installation instructions Owner's manual Installation instructions Owner's manual

GE JBP70BKBB Owner's Manual Manual pdf 10 page image

10Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety InstructionsOven Control, Clock and Timer Features and SettingsBAKE/TEMP RECALL PadTouch this pad to select the bake function.BAKE LightFlashes while in edit mode—you can changethe oven temperature at this point. Glowswhen the oven is in bake mode.START/ON PadMust be touched to start any cooking orcleaning function.DisplayShows the time of day, oven temperature,and the times set for the timer or automaticoven operations. The display will show PrEwhile preheating. When the oven reachesthe selected temperature, the oven controlwill beep and the display will show the oventemperature.If “F– and a number or letter” flash in the display and theoven control signals, this indicates a function error code.If your oven was set for a timed oven operation anda power outage occurred, the clock and all programmedfunctions must be reset.The time of day will flash in the display when there hasbeen a power outage. Reset the clock.If the function error code appears during the self-cleaningcycle, check the oven door latch. The latch handle may havebeen moved, even if only slightly, from the latched position.Make sure the latch is moved to the right as far as it will go.Touch the CLEAR/OFF pad. Allow the oven to cool forone hour. Put the oven back into operation. If the functionerror code repeats, disconnect the power to the range andcall for service.KITCHEN TIMER ON/OFFor TIMER ON/OFF PadTouch this pad to select the timer feature.Then press + and – pads to adjust time.TIMER LightFlashes while in edit mode—you can changethe set time at this point. Glows when thetimer has been activated. Flashes again whenthe time has run out until the control is reset.CLOCK PadTo set the clock, press this pad twice andthen press the + and – pads. The time ofday will flash in the display when the ovenis first turned on.START TIME Pad (on some models)Use along with the COOKING TIME orSELF CLEAN pads to set the oven to startand stop automatically at a time you set.START TIME LightFlashes while in edit mode—you can changethe start time at this point. Glows when thefunction has been activated.COOKING TIME Pad (on some models)Touch this pad and then touch the + or –pads to set the amount of time you wantyour food to cook. The oven will shut offwhen the cooking time has run out.COOKING TIME LightFlashes while in edit mode—you can changethe set time at this point. Glows when thefunction has been activated. Flashes againwhen the time has run out until the controlis reset.Throughout this manual, features and appearance may vary from your model.Using the oven controls.