GE JB850 Owner's Manual

Also see for JB850: Owner's manual Owner's manual Owner's manual

GE JB850 Owner's Manual Manual pdf 24 page image

24 49-80701-2MaintenanceCARE AND CLEANING: MaintenanceUsegloves orclothReceptacleG9 BulbSocketTabGlass coverReceptacle(on some models)SHOCK OR BURN HAZARD:%HIRUHUHSODFLQJRYHQOLJKWEXOEGLVFRQQHFWWKHHOHFWULFDOpower to the range at the main fuse or circuit breaker panel. Failure to do so may resultin electric shock or burn.WARNINGBURN HAZARD: The glass cover and bulb should be removed when cool. Touching hotglass with bare hands or a damp cloth can cause burns.CAUTIONOven Light ReplacementTo remove:1. Turn the glass cover counterclockwise 1/4 turn untilthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip. 8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEE\pulling it straight out.To replace: 8VHDQHZYROWKDORJHQEXOEQRWWRH[FHHGZDWWV5HSODFHWKHEXOEZLWKWKHVDPHW\SHRIEXOEWKDWZDVUHPRYHG%HVXUHWKHUHSODFHPHQWEXOELVrated 120 volts or 130 volts (NOT 12 volts). 8VLQJJORYHVRUDGU\FORWKUHPRYHWKHEXOEIURPLWVpackaging. Do not touch the bulb with bare fingers.Oil from skin will damage the bulb and shorten its life.3. Push the bulb straight into the receptacle all the way.4. Place the tabs of the glass cover into the grooves ofthe socket. Turn the glass cover clockwise 1/4 turn.For improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool. 5HFRQQHFWHOHFWULFDOSRZHUWRWKHRYHQOven Light ReplacementTo remove:1. Turn the glass cover counterclockwise 1/4 turn untilthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip.2. Remove the bulb by turning it counter-clockwise.To replace:1. Replace bulb with a new 40-watt appliance bulb.Insert the bulb and turn it clockwise until it is tight.2. Place the tabs of the glass cover into the grooves ofthe socket. Turn the glass cover clockwise 1/4 turn.For improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.3. Reconnect electrical power to the oven.