6-30 F60 Feeder Protection System GE Multilin6.5 PRODUCT INFORMATION 6 ACTUAL VALUES66.5PRODUCT INFORMATION 6.5.1 MODEL INFORMATIONPATH: ACTUAL VALUES PRODUCT INFO MODEL INFORMATIONThe order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.6.5.2 FIRMWARE REVISIONSPATH: ACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONSThe shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have beeninstalled. MODEL INFORMATIONORDER CODE LINE 1:F60-E00-HCH-F8F-H6ARange: standard GE Multilin order code format;example order code shownMESSAGE ORDER CODE LINE 2: Range: standard GE Multilin order code formatMESSAGE ORDER CODE LINE 3: Range: standard GE Multilin order code formatMESSAGE ORDER CODE LINE 4: Range: standard GE Multilin order code formatMESSAGE SERIAL NUMBER: Range: standard GE Multilin serial number formatMESSAGE ETHERNET MAC ADDRESS000000000000Range: standard Ethernet MAC address formatMESSAGE MANUFACTURING DATE:0Range: YYYY/MM/DD HH:MM:SSMESSAGE CT/ VT ADVANCED DIAGACTIVE: NoRange: Yes, NoMESSAGE OPERATING TIME:0:00:00Range: operating time in HH:MM:SSMESSAGE LAST SETTING CHANGE:1970/01/01 23:11:19Range: YYYY/MM/DD HH:MM:SS FIRMWARE REVISIONSF60 Feeder RelayREVISION: 7.1xRange: 0.00 to 655.35Revision number of the application firmware.MESSAGE MODIFICATION FILENUMBER: 0Range: 0 to 65535 (ID of the MOD FILE)Value is 0 for each standard firmware release.MESSAGE BOOT PROGRAMREVISION: 3.01Range: 0.00 to 655.35Revision number of the boot program firmware.MESSAGE FRONT PANEL PROGRAMREVISION: 0.08Range: 0.00 to 655.35Revision number of faceplate program firmware.MESSAGE COMPILE DATE:2004/09/15 04:55:16Range: Any valid date and time.Date and time when product firmware was built.MESSAGE BOOT DATE:2004/09/15 16:41:32Range: Any valid date and time.Date and time when the boot program was built.
