CHAPTER 6: ACTUAL VALUES RECORDSC70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL 6-256Up and Down pushbuttons move the event selector up and down. When the selector is at the bottom of the display, theDown pushbutton also scrolls the page, and similarly when the active selector is at the top of the display the Uppushbutton scroll the page.A selected event is highlighted in yellow and becomes active by pressing the Up or Down pushbutton.There are two event markers, one green, the other cyan. To mark some an event, use the Up and Down pushbuttons toselect it (highlight in yellow), then press the green or cyan Mark Event Tab pushbutton. The mark color hides the selectoruntil the selector is moved. A field at the top of the page shows the interval between the two marks.Figure 6-7: Event record6.5.3 Oscillography6.5.3.1 Enhanced and standard front panelsACTUAL VALUES RECORDS OSCILLOGRAPHYThis menu allows the user to view the number of triggers involved and number of oscillography traces available. The cyclesper record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillographysection of chapter 5 for details.A trigger can be forced here at any time by setting “Yes” to the FORCE TRIGGER? command. See the COMMANDS CLEARRECORDS menu for information on clearing the oscillography records.6.5.4 Data loggerACTUAL VALUES RECORDS DATA LOGGER OSCILLOGRAPHY FORCE TRIGGER?NoRange: No, Yes NUMBER OF TRIGGERS:0 AVAILABLE RECORDS:0 CYCLES PER RECORD:0 LAST CLEARED DATE:2000/07/14 15:40:16 DATA LOGGER OLDEST SAMPLE TIME:2000/01/14 13:45:51
