GE C30 Instruction Manual

Also see for C30: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

GE C30 Instruction Manual Manual pdf 34 page image

2-6 C30 Controller System GE Multilin2.1 INTRODUCTION 2 PRODUCT DESCRIPTION22.1.3 REPLACEMENT MODULESReplacement modules can be ordered separately as shown below. When ordering a replacement CPU module or face-plate, please provide the serial number of your existing unit.Not all replacement modules may be applicable to the C30 relay. Only the modules specified in the order codes areavailable as replacement modules.Replacement module codes are subject to change without notice. CPU modules 9G, 9H, 9L, and 9M are obsolete.See http://www.gedigitalenergy.com/multilin/order.htm for the latest ordering options.The replacement module order codes for the horizontal mount units are shown below.Table 2–6: ORDER CODES FOR REPLACEMENT MODULES, HORIZONTAL UNITSUR - ** - *POWER SUPPLY(redundant supply only available in horizontal units;and must be same type as main supply) (for redundantsupply, must swap both power supplies whenswitching from RH to SH)| 1H | 125 / 250 V AC/DC| 1L | 24 to 48 V (DC only)| SH A 125 / 300 V AC/DC| RL H 24 to 48 V (DC only)CPU | 9E | RS485 and RS485 (Modbus RTU, DNP 3.0)| 9J | RS485, multi-mode ST 100Base-FX and 10/100Base-T (Ethernet, Modbus TCP/IP, DNP 3.0)| 9K | RS485, multi-mode ST redundant 100Base-FX and 10/100Base-T (Ethernet, Modbus TCP/IP, DNP 3.0)| 9N | RS485 and 10/100Base-T| 9S | RS485 and six-port managed Ethernet switchFACEPLATE/DISPLAY | 3C | Horizontal faceplate with keypad and English display| 3D | Horizontal faceplate with keypad and French display| 3R | Horizontal faceplate with keypad and Russian display| 3A | Horizontal faceplate with keypad and Chinese display| 3P | Horizontal faceplate with keypad, user-programmable pushbuttons, and English display| 3G | Horizontal faceplate with keypad, user-programmable pushbuttons, and French display| 3S | Horizontal faceplate with keypad, user-programmable pushbuttons, and Russian display| 3B | Horizontal faceplate with keypad, user-programmable pushbuttons, and Chinese display| 3K | Enhanced front panel with English display| 3M | Enhanced front panel with French display| 3Q | Enhanced front panel with Russian display| 3U | Enhanced front panel with Chinese display| 3L | Enhanced front panel with English display and user-programmable pushbuttons| 3N | Enhanced front panel with French display and user-programmable pushbuttons| 3T | Enhanced front panel with Russian display and user-programmable pushbuttons| 3V | Enhanced front panel with Chinese display and user-programmable pushbuttonsDIGITAL INPUTS AND OUTPUTS | 4A | 4 Solid-State (no monitoring) MOSFET outputs| 4B | 4 Solid-State (voltage with optional current) MOSFET outputs| 4C | 4 Solid-State (current with optional voltage) MOSFET outputs| 4D | 16 digital inputs with Auto-Burnishing| 4L | 14 Form-A (no monitoring) Latching outputs| 67 | 8 Form-A (no monitoring) outputs| 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs| 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs| 6C | 8 Form-C outputs| 6D | 16 digital inputs| 6E | 4 Form-C outputs, 8 digital inputs| 6F | 8 Fast Form-C outputs| 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs| 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs| 6K | 4 Form-C and 4 Fast Form-C outputs| 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs| 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs| 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs| 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs| 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs| 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs| 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs| 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs| 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputsCT/VTMODULES(NOT AVAILABLE FOR THE C30)| 8F | Standard 4CT/4VT| 8G | Sensitive Ground 4CT/4VT| 8H | Standard 8CT| 8J | Sensitive Ground 8CT| 8L | Standard 4CT/4VT with enhanced diagnostics| 8M | Sensitive Ground 4CT/4VT with enhanced diagnostics| 8N | Standard 8CT with enhanced diagnostics| 8R | Sensitive Ground 8CT with enhanced diagnosticsINTER-RELAY COMMUNICATIONS | 2A | C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode| 2B | C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode| 2E | Bi-phase, single channel| 2F | Bi-phase, dual channel| 2G | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel| 2H | IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels| 2S | Six-port managed Ethernet switch with high voltage power supply (110 to 250 V DC / 100 to 240 V AC)| 2T | Six-port managed Ethernet switch with low voltage power supply (48 V DC)| 72 | 1550 nm, single-mode, LASER, 1 Channel| 73 | 1550 nm, single-mode, LASER, 2 Channel| 74 | Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER| 75 | Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER| 76 | IEEE C37.94, 820 nm, multimode, LED, 1 Channel| 77 | IEEE C37.94, 820 nm, multimode, LED, 2 Channels| 7A | 820 nm, multi-mode, LED, 1 Channel| 7B | 1300 nm, multi-mode, LED, 1 Channel| 7C | 1300 nm, single-mode, ELED, 1 Channel| 7D | 1300 nm, single-mode, LASER, 1 Channel| 7E | Channel 1 - G.703; Channel 2 - 820 nm, multi-mode| 7F | Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode| 7G | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED| 7H | 820 nm, multi-mode, LED, 2 Channels| 7I | 1300 nm, multi-mode, LED, 2 Channels| 7J | 1300 nm, single-mode, ELED, 2 Channels| 7K | 1300 nm, single-mode, LASER, 2 Channels| 7L | Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED| 7M | Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED| 7N | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED| 7P | Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER| 7Q | Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER| 7R | G.703, 1 Channel| 7S | G.703, 2 Channels| 7T | RS422, 1 Channel| 7W | RS422, 2 ChannelsTRANSDUCERINPUTS/OUTPUTS| 5A | 4 DCmA inputs, 4 DCmA outputs (only one 5A module is allowed)| 5C | 8 RTD inputs| 5D | 4 RTD inputs, 4 DCmA outputs (only one 5D module is allowed)| 5E | 4 DCmA inputs, 4 RTD inputs| 5F | 8 DCmA inputsNOTENOTE