GE 8005 User Manual

Also see for 28041 Series: User guide User guide User guide User guide

Contents

GE 8005 User Manual Manual pdf 49 page image

49To re-record the ringer tone:1. Use the 6 or 5 button to scroll to RE-RECORD.. Press the SELECT button to confirm, and the display willshow the count-down display again.3. Follow the recording steps to record the ringer tone.Record with the Handset MicrophoneFrom the REC RING TONE menu;1. Use the 6 or 5 button to scroll to the MICROPHONE.. Press the SELECT button to enter the count-down display.3. Press the SELECT button to start, then the handset willstart recording and the second number will decreaseautomatically.4. The recording will stop when the display counts down to 0seconds.Or you may press the SELECT button any time to stop.When the recording stops, the display will show options:REPLAY and RE-RECORD. Follow the steps under section"Record with Included Audio Cable or an Optional Headset"to replay the recorded ringer tone or re-record the ringertone.IMPORTANT NOTE: When you want to use the handset microphoneto record ringer tones, DO NOT insert the Audio cable or theoptional headset into the headset jack of the handset.Choosing the Recorded Sound Clip as Ringer ToneRefer to Section; "Telephone Setup/Sound Setting/Ringer Tone".Assigning the Recorded Sound Clip to Phone BookRecordRefer to Section; "Phone Book/Adding Phone Book Entries and Phone Book/Editing aPhone Book Record".STARTMICROPHONE12 SECONDSPRESS SELECT TOMICROPHONERE-RECORDREPLAYMICROPHONEREC RINGER TONEHEADSETAUDIO_CABLE