GE 8005 User Manual

Also see for 28041 Series: User guide User guide User guide User guide

Contents

GE 8005 User Manual Manual pdf 48 page image

48NOTE: If the memory is full, the handset will prompt FULL when theSELECT button is pressed in Step 6.Record with Included Audio Cable or an Optional HeadsetAudio Cable: Before recording the ringer tone, make sure that the provided audiocable is correctly installed into your computer or CD player or TAPE player by insertingthe 3.5mm plug (the larger end of the connector) into the headphone jack of your PCor audio source, and insert the .5mm plug (the smaller end of the connector) into theheadset jack on the side of your 8041 handset or Optional Model 8011 handset.Optional Headset: Before recording the ringer tone, make sure that the optionalheadset is connected to the headset jack on the side of your 8041 handset orOptional Model 8011 handset.From the REC RING TONE menu;1. Use the 6 or 5 button to scroll to the AUDIO_CABLE orHEADSET.. Press the SELECT button to enter.3. Verify the cable/headset is connected to your handset,then press the SELECT button again to start the count-down display. The handset will start recording and thesecond number will decrease automatically.4. The recording will stop when the display counts downto 0 seconds.Or you may press the SELECT button any time to stop.When the recording stops, the display will show options:REPLAY and RE-RECORD.NOTE: After recording, you may also press the*EXIT button to return to the Sound Setting menu.To replay the recorded ringer tone:1. Use the 6 or 5 button to scroll to REPLAY.. Press the SELECT button to play the recorded ringer tone.3. When finished, the display shows both options again.STARTAUDIO CABLE12 SECONDSPRESS SELECT TOAUDIO CABLERE-RECORDREPLAYMICROPHONEREC RINGER TONEHEADSETAUDIO_CABLE