GE 28001 Quick Setup Manual

Also see for Masoneilan VariPak 28001: Instruction manual

Contents

i ntercom f eatures

GE 28001 Quick Setup Manual Manual pdf 2 page image

naMinG tHe HandSet1. Use the touch-tone pad to enter a name (up to 15 characters).NOTE: If you make a mistake, use the DELETE button to backspaceand delete one character at a time.2. Press the MUTE/PROG button to save your name. You will hear a confirmationtone and the handset name shows in the display.de-reGiStrationDe-registration cancels registration. During the de-registration process, keepthe handset near the base.From the Handset Setup Menu:1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the DEREGISTRATIONsub-menu.2. Press the MUTE/PROG button to enter the menu. DEREGISTRATION 1YES42NO - - - shows in the display The default setting is "2NO".3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.WARNING: It is not recommended that a handset be de-registeredunless absolutely necessary because once a handset is de-registered,that handset’s telephone features cannot be used until the handset isre-registered.4. Select NO, if you do not want to de-register.5. If you select 1YES, press the MUTE/PROG button and MOVE NEAR TO BASEdisplays for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.6. Press the touch-tone pad to select 1YES or 2NO, or use the CALLER ID-VOLUME(6 or 5) button to scroll to 1YES or 2NO.7. If you select YES, press the MUTE/PROG button to confirm. You will hear aconfirmation tone. Then HANDSET X DEREGISTERED shows in the display toconfirm the handset is deregistered.NOTE: When you complete the de-registration process, HANDSETNEEDS REGISTRATION shows in the display. To use the handset,you MUST re-register the handset using the Registration process.Global de-reGiStration (applicable only witH additional HandSetS)If one or more handsets becomes lost, you should de-register all handsets toensure proper system operation. Follow the steps below to de-register all handsetsat the same time.WARNING: It is not recommended that a handset be de-registeredunless absolutely necessary because once a handset is de-registered,that handset’s telephone features cannot be used until the handset isre-registered.1. Press and hold the page button on the base until the CHARGE/IN USE indicatoron the base flashes.2. Press and hold the page button on the base again until the CHARGE/IN USEindicator on the base flashes rapidly.3. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS REGISTRATION shows in the display.intercoM operation (applicable only witH additional HandSetS)The intercom feature allows you to have a conversation with another registeredhandset without tying up the telephone line, allowing you to still receive incomingcalls.MakinG an intercoM call1. Make sure the handset is OFF (not in talk mode).2. Press the INTERCOM button on the handset.3. Use the touch-tone pad to select the handset you want to page.NOTE: To cancel page, press the INTERCOM button again or the*EXIT button on the sending handset.4. Wait for the person at the receiving handset to press the INTERCOM button.NOTE: If the receiving handset does not answer within two minutes,the intercom call is automatically canceled. The originating handsetdisplays NO ANSWER.5. When finished, press the *EXIT button or INTERCOM button on either handset todeactivate the intercom.NOTE: The system is expandable up to 4 handsets (by purchaseof optional Model 28001 handset with recharge cradle). When 4handsets are registered, the system can handle 2 separate intercomoperations at once, for example, 1st handset intercoms with 2ndhandset while 3rd handset intercoms with 4th handset.receivinG an intercoM callWhen you receive an intercom call, your handset beeps. To answer the call pressthe INTERCOM button or TALK/CALL BACK button.advanced intercoM featureSreceivinG an incoMinG call durinG an intercoM callIf you receive a telephone call during an intercom call, the intercom call isimmediately terminated and both handsets ring. Either handset user may press theTALK/CALL BACK button to answer the call.uSinG intercoM witH external telepHone callSDuring a telephone call, you may use the intercom/paging function to pageanother handset and have an off line, private (two-way) intercom conversation.You may also have a three-way conversation between the external caller and thehandsets, or you may transfer the external telephone call to another handset.NOTE: Before you intercom/page another handset, you must decidewhether you want to create a two-way or a three-way conversation.two-way callinG1. During an external call, press the INTERCOM button, and use the touch-tonepad to enter the handset number you want to call.NOTE: The receiving handset presses the INTERCOM button toanswer the intercom call. Both intercom users may speak privately.The external caller will not hear the intercom conversation.2. When finished, press the *EXIT button or INTERCOM button to end the intercomcall, return to the talk mode, and resume your original telephone conversation.tHree-way callinG1. During an external call, press the INTERCOM button. LINE ON HOLDEXTENSION? shows in the display.2. Use the touch-tone pad to select Handset #. You will hear a paging tone andPAGING shows in the originating handset’s display.NOTE: PAGING FROM... shows in the display on the receivinghandset, and the receiving handset presses the INTERCOM or TALK/CALL BACK button to answer the intercom.3. When the receiving handset connects, press the FORMAT/CONF buttonon the originating handset to conference with the receiving handset andthe external caller. CONFERENCE shows in the display on the originating andreceiving handsets.NOTE: A handset can enter conference mode directly by pressingTALK/CALL BACK on the second handset during a call.tranSferrinG external callS to otHer HandSetSDuring an external call, you may transfer the external call to another handset.1. Press the INTERCOM button on the originating handset to put an external callon hold, and then page the receiving handset.2. Use the touch-tone pad on the handset to select Handset #. You will hear apaging tone. PAGING shows on the originating handset’s display, and PAGINGFROM... shows on the receiving handset’s display.3. When the receiving handset connects, press the TALK/CALL BACK button on theoriginating handset to transfer the call.-OR-4. Press the TALK/CALL BACK button on the originating handset to transfer thecall. If the receiving handset does not answer within 30 seconds, the originatinghandset rings back and displays CALLBACK. If the originating handset does notanswer within 20 seconds, the call is automatically dropped.warranty aSSiStanceIf trouble is experienced with this equipment, for warranty information, pleasecontact customer service at 1-800-448-0329. If the equipment is causingharm to the telephone network, the telephone company may require that youdisconnect the equipment until the problem is resolved.Any unauthorized repairs, changes or modifications not expressly approvedby Thomson Inc. could void the user’s authority to operate this product.For instructions on how to obtain a replacement unit, refer to the warrantyincluded in this guide or call customer service at 1-800-448-0329.Or refer inquiries to:Thomson Inc.Manager, Consumer RelationsP O Box 1976Indianapolis, IN 46206Attach your sales receipt to this booklet for future reference or jot down thedate this product was purchased or received as a gift. This information will bevaluable if service should be required during the warranty period.Purchase dateName of store

/ 2

Related manuals for GE Masoneilan VariPak 28001