1Model 279091.9 GHz CordlessHandset TelephoneAnswering SystemUser’s GuideEQUIPMENT APPROVAL INFORMATIONYour telephone equipment is approved for connection to the PublicSwitched Telephone Network and is in compliance with parts 15 andFCC Rules and Regulations and the Technical Requirements forTelephone Terminal Equipment published by ACTA.1 Notification to the Local Telephone CompanyOn the bottom of this equipment is a label indicating, among otherinformation, the US number and Ringer Equivalence Number (REN)for the equipment. You must, upon request, provide this information toyour telephone company.The REN is useful in determining the number of devices you mayconnect to your telephone line and still have all of these devices ringyou’re your telephone number is called. In most (but not all) areas, thesum of the RENs of all devices connected to one line should notexceed 5. To be certain of the number of devices you may connect toyour line as determined by the REN, you should contact your localtelephone company.A plug and jack used to connect this equipment to the premises wiringand telephone network must comply with the applicable FCC Part 68rules and requirements adopted by the ACTA. A compliant telephonecord and modular plug is provided with this product. It is designed tobe connected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.Notes‧ This equipment may not be used on coin service provided by thetelephone company.‧ Party lines are subject to state tariffs, and therefore, you may not beable to use your own telephone equipment if you are on a party line.Check with your local telephone company.‧ Notice must be given to the telephone company upon permanentdisconnection of your telephone from your line.‧ If your home has specially wired alarm equipment connected to thetelephone line, ensure the installation of this product does not disable