Security functionsTrusted Platform Module - TPM (device dependent)TPMTrusted Platform ModuleTo use the TPM, you must enable the TPM in the BIOS Setup before the software isinstalled. The requirement for this is that you have assigned at least the supervisorHDD password (see "Security functions", Page 58).Enabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 58).► Call BIOS Setup and select the Security menu.► Mark the TPM Security Chip Setting field and press the Enter key.► Select the entry Enabled to enable the TPM Once you have enabled the TPM the Clear Security Chip menu item appears.You can clear the holder in the TPM using Clear Security Chip. With Enabled,all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keysetc.) generated by applications are deleted.Take note that you can then no longer access the data you haveencrypted on the holder-based keys!► Select the Exit Saving Changes option in the Exit menu.► Press the Enter key and select Yes. The Tablet PC restarts and the TPM is enabled after the reboot.Disabling TPM• Requirement: You have assigned a supervisor password (see "Security functions", Page 58).► Call BIOS Setup and select the Security menu.► Mark the TPM Security Chip Setting field and press the Enter key.► Select the entry Disabled to disable the TPM.► From the Exit menu, choose the option Exit Saving Changes.► Press the Enter key and select Yes. The Tablet PC is rebooted and the TPM is disabled.64 Fujitsu
