Fujitsu Stylistic LT C-500 Installation Instructions Manual

Also see for Stylistic LT C-500: User guide User guide Installation guide Installation instructions User guide

Contents

installation instructions

Stylistic LT C-500 is a trademark of Fujitsu PC Corp. © 2000 Fujitsu PC Corp.8/00 58-0766-00AFerrite CoreInstallation InstructionsStylistic LT C-500In order to ensure compliance with the pertinent RFemissions limits governing the Stylistic LT pen tablet,shielded interconnect cables must be used.Figure 1. Ferrite Core - OpenTo meet FCC Class B limits, ferrite cores must be addedto the RJ-11 and the microphone cables when they areconnected to the Stylistic LT C-500. The ferrite coreshould be installed adjacent to the end of the cable thatattaches to the system.ConnectorStylistic LT C-500CableTo install the core, open it up so that it lies flat (seeFigure 1). Lay the modem or microphone cable intoone of the channels in the open core. The cable shouldbe positioned so that it is as close as possible to theconnector that enters the pen tablet.Holding the cable in place, snap the core around thecable. Figure 2 illustrates the closed ferrite corewithout a cable inserted. The illustration may differslightly from the ferrite core delivered with yoursystem.Be sure to leave the ferrite core in place when themodem and/or microphone cables are plugged intothe pen tablet.Figure 2. Ferrite Core - Closed

/ 1

Related manuals for Fujitsu Stylistic LT C-500