Fujitsu Portfolio Case FMWCC35 Installation Instructions Manual

PenCentra 130 is a trademark of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.6/99 58-0672-00AFMWCC35Portfolio CaseInstallation InstructionsPenCentra 130The PenCentra 130 portfolio case is designed to providea compact, elegant solution for using and transportingyour pen tablet and keyboard.The portfolio case consists of two distinct storage areas: apen tablet easel and a keyboard platform.To open the portfolio, pull up the Velcro® strip that issecuring the back flap, as shown in Figure 1. Unzip thewraparound zipper and flip the portfolio open. Extendthe back flap so that it forms a stand for the pen tablet.(see Figure 2).Figure 1. Closed Portfolio CaseFigure 2. Open Portfolio CaseBack FlapWraparoundZipperShoulder StrapEaselBackScreen FlapTabletPlatformTabletLedgeVelcro®strips (4 places)CableStrapBattery/Pen StrapsDetach the Velcro ® strips securing the vinyl screen flapand lay it over the back of the easel to reveal the pentablet platform. At the bottom of the platform is aflexible ledge upon which the pen tablet sits. To theright of the ledge is an elasticized strap for securing aspare battery; a smaller strap for securing your pen isaffixed to the top of the battery strap.Installing the PenCentra 130 0Tuck your PenCentra 130 behind the ledge lip and laythe system flat onto the platform. It should be a snugfit. When storing your pen tablet in the portfolio, laythe nylon flap over the screen to protect it fromscratches. See Figure 3 for a fully assembled system inthe portfolio.Figure 3. Assembled PenCentra 130 in PortfolioInstalling the Keyboard 0To install the keyboard, first remove the adhesivebacking from the four Velcro strips that are positionedat the ends of the two strips on the keyboard platform.Holding the keyboard directly over the adhesive strips,carefully lower it so that is centered on the platform.Press the keyboard down to create a strong adhesivebond.Unfasten the Velcro®-backed cable strap locatedbehind the keyboard. Route the keyboard cablethrough the cable strap and fasten the strap. Plug thekeyboard cable into the PS/2-style port on the rightside of the pen tablet.CableStrapPS/2Port

/ 2

Related manuals for Fujitsu PenCentra 130 FMWCC35