Fujitsu PenCentra 130 User Instructions

Also see for 200: Manual User guide User guide Specification sheet User guide

PenCentra 130 is a trademark of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.9/99 58-0671-00BFMWCC36Harsh Environment CaseUser’s InstructionsPenCentra 130These instructions provide details on using theFMWCC36 harsh environment case (HEC). TheHEC provides added protection for yourPenCentra 130 when it is being used, transported,or stored. Note the following when using theharsh environment case:• When charging the pen tablet in the HEC,suspend the system to avoid overheating.• To prevent scratches, a screen protector shouldbe installed on the display window of the HEC.Two screen protectors are provided with theHEC. Additional screen protectors can beobtained using order number FMWSP9(12-pack).• If your PenCentra 130 will be used both with andwithout the HEC, any screen protector on thepen tablet can be left in place. However, if thepen tablet will be used only in the HEC, anyscreen protector on the pen tablet should beremoved for better viewing.• If you use a pen tether, attach it to one of theD-rings on the back of the case.Installing the Pen Tablet in the Case 0U nz ip the wraparound zipper, and lay the HECopen flat, as shown in Figure 1.Figure 1. Empty PenCentra 130 HECHEC ScreenWraparound ZipperPosition the PenCentra 130 in the back of the case, asshown in Figure 2. Zip up the wraparound zipper.Verify that the Record Button extension is positioneddirectly over the Record Button.Figure 2. PenCentra 130 in HECOnce the system is installed in the HEC, you can eitherstore the pen in the system pen holder or it can bestored in the pen holder on the left of the HEC, asshown in Figure 3.Figure 3. Enclosed PenCentra 130Installing a Screen Protector 01. To ensure good adhesion, clean the exterior surface ofthe HEC window with a soft cotton cloth dampenedwith denatured alcohol before installing the screenprotector.Note: Using denatured alcohol to clean the window mayresult in streaking when it dries. If streaking occurs,gently buff the surface with a clean, soft cloth.Record Button ExtensionRecord ButtonPen Holder

/ 2

Related manuals for Fujitsu 200