Fujitsu PRIMEHPC FX1000 User Manual

Also see for PRIMEHPC FX1000: Operating manual

Table A.2 Information Specified on the [Internet(Mail Only) connection environment settings] Screen(continued)Input Item Input Required? DescriptionPassword Conditional(*2) Specify the password for the authentication server with up to64 single-byte alphanumeric characters. "*" (asterisk) isdisplayed for every specified character.POP Server Conditional(*3) Specify the POP server name or IP address with up to 128single-byte alphanumeric characters.Large data transmissionmethod(*4)- Select a large data transmission method from the following:- No split- Split large data into multiple E-mails- Split event (Default)Split size Conditional(*5) Specify the division size with up to 3 single-byte digits.- If [Split large data into multiple E-mails] is selected in [Largedata transmission method], specify a value between 10 and100 KB. The default is 64 KB.- If [Split event] is selected in [Large data transmissionmethod], specify a value between 64 and 512 KB. Thedefault is 512 KB.Encryption type(*4) - Select an encryption type from the following:- S/MIME format (Default)- Conventional formatConventionally, encryption is performed during REMCS fileformat creation. Instead, REMCS supports the generally usedS/MIME encrypted e-mail method.*1 Valid only when [AUTH SMTP] is selected in [Authentication type]*2 Required when anything other than [No Certification] is selected in [Authentication type]*3 Required when [POP Before SMTP] is selected in [Authentication type]*4 The selectable encryption types change as follows according to the large data transmission method:- No split: Both formats selectable- Split large data into multiple E-mails: Conventional format only- Split event: Both formats selectable*5 Required when [No split] is selected in [Large data transmission method]6. Click the [Next] button.The [Periodical Connection settings] screen appears.Appendix A REMCSC120-0091-02ENA.1 REMCS Settings63