Fujitsu ETERNUS AF250 S2 Basic Operation Manual

Also see for ETERNUS AF250: Safety precautions Configuration guide Setup guide Configuration guide Configuration guide

■ Host InterfacesA host interface is a board that has interface ports to connect a controller to the server.There are three types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, and iSCSI 10Gbit/s.● FCThe ports on the host interface are used for connecting a controller to a server with an FC cable. This port uses aDual LC connector.Figure 7 Host Interface for FC Cable Connection (Installed in a Controller)12 345 61. Host interface (CA#0)2. Host interface port (CA#0, Port#0)3. Host interface port (CA#0, Port#1)4. Host interface (CA#1)5. Host interface port (CA#1, Port#0)6. Host interface port (CA#1, Port#1)● iSCSI 10Gbit/s (10GBASE-SR) (for FC Cable Connection)The ports on the host interface are used for connecting a controller to a server with an FC cable. This port uses aDual LC connector.Figure 8 Host Interface for FC Cable Connections (Equipped with SFP+ Modules in All Ports and Installed in theControllers)12 345 61. Host interface (CA#0)2. Host interface port (CA#0, Port#0)3. Host interface port (CA#0, Port#1)4. Host interface (CA#1)5. Host interface port (CA#1, Port#0)6. Host interface port (CA#1, Port#1)1. Component Names and LED NamesController Enclosures14FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)Copyright 2019 FUJITSU LIMITEDP3AG-1842-06ENZ0