Fujitsu BS2000 SE Series Operating Manual

Also see for BS2000 SE Series: Basic Operating Manual Quick guide Manual Operating manual Operating manual

Contents

Examples of SVP operation Operating the service processor58 U41859-J-Z126-2-764.5.2 Activating IORSFThe set IORSF must be activated with an IMPL:RequirementYou are in the AUXILIARY FRAME: IORSF CONTROL.Ê Click on [RETURN] to switch back to the AUXILIARY FRAME: MENU.Ê Enter 4 in the SELECTION=> field. Press the [ENTER] key.The AUXILIARY FRAME: POWER STAND-BY/IMPL screen is displayed:Figure 28: AUXILIARY FRAME: POWER STAND-BY/IMPL screenÊ Enter 2 in the FUNCTION=> field to execute an IMPL. Press the [ENTER] key.The following prompt appears on the screen:v CAUTION!The IMPL must not be executed during system operation! If this instruction isnot heeded, BS2000 will be aborted!Ê Press the [Y] key to execute the IMPL or the [Y] key to cancel the procedure. Confirmyour entry with the [ENTER] key.----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E90L01GFUNCTION=> 2*1 POWER STAND-BY*2 IMPLCL-0 CPU-0 CHP-0 RUNRA []-[]00************************************ ** ARE YOU SURE ? (ENTER Y OR N) N ** ************************************