Fujitsu BS2000 SE Series Operating Manual

Also see for BS2000 SE Series: Basic Operating Manual Quick guide Manual Operating manual Operating manual

Contents

Operating the service processor Using SVP framesU41859-J-Z126-2-76 194.3 Using SVP framesYou assign a job to the SVP by invoking the relevant frame, selecting the desired function,and specifying the required parameters. To select a function or specify a parameter, youmust enter the alphanumeric characters shown in the frame in the input fields marked byan arrow (=>). After an entry, the cursor automatically switches to the next entry field. Youcan select entry fields manually with the tabulator key or arrow keys. Once you haveentered all the functions and parameters assigned to a job, press the [ENTER] key. In someframes, SVP functions can also be initiated by actuating the corresponding function key(also known as pfkey).Instead of selecting a function, you can also enter a command in the command input line inall frames (screen line 24) and assign a job to the SVP in this way. Frames can also beselected using the FRËFrame-ID, e.g. FR ML (to switch to the MODE SELECTION FRAME,in upper or lower case). A command entered in line 24 takes priority over a selected framefunction.4.3.1 SVP functions (function keys)A virtual keyboard is available to you for making entires on the SVP console.Ê Click the keyboard icon at the top right to open the virtual keyboard. Clicking the iconagain closes the keyboard.Function keys (pfkeys) [PF1] through [PF24] and [Clear] and [Cancel] are located in theupper part of the virtual keyboard. You can trigger the corresponding SVP functions byclicking with the mouse.