Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

LED105code no. Setting mode LED104code no. Setting function Factorysetting Remarks7 2Electricitymeter pulsesetting 1 *20 0 Setting number xx00 ♦Set the ones digit and tens digit ofthe number of the electricity meterpulse setting connected to CN135.0 1 Setting number xx01•••••••••9 8 Setting number xx989 9 Setting number xx997 3Electricitymeter pulsesetting 2 *20 0 Setting number 00xx ♦Set the hundreds digit andthousands digit of the electricitymeter pulse setting connected toCN135.0 1 Setting number 01xx•••••••••9 8 Setting number 98xx9 9 Setting number 99xx9 0 Prohibited0 0 Prohibited ♦Setting prohibited0 1 Prohibited0 2 Prohibited0 3 Prohibited0 4 Prohibited0 5 Prohibited0 6 Prohibited0 7 Prohibited0 8 Prohibited0 9 Prohibited1 0 Prohibited1 1 Prohibited*1: When electricity meter number is set to “000” and “201 to 299”, the pulses input to CN135 be-come ineffective. Available setting number is “001” to “200”.*2: When the electricity meter pulse setting is set to “0000”, the pulses input to CN135 become inef-fective. Available setting number is “0001” to “9999”.2-1. Setting on outdoor unit PCB - (07-66) - 2. Function settingsFUNCTIONSETTINGSFUNCTIONSETTINGS