Epson YM26A Instructions Manual

Also see for YM26A: Watch Movement Specification and Drawing

Instruction of Watch MovementCrown positionN : normal 1 : 1st click 2 : 2nd clickCrown Free Turn clockwise for datechange Time settingButton A World time city setting(Clockwise)Sound demonstration(more than 2 seconds) [*1]Button B World time city setting(Counterclockwise)Alarm time setting(at 6H small circle) [*1] Display Crown and button operationCal. YM26A[*1] World time hand, alarm hand and city hand position adjustmentIf the world time hands and the alarm hands are not adjusted to the current time or the city hand is not in the"0" position, follow the procedures below to set them.(1) Pull the crown out to the 2nd click position.(2) Set the alarm hands.Press the button B repeatedly to set the alarm hands to the time the main time hands indicate.(3) Set the city hand.Press the button A for 2 seconds.Press the button B to set the city hand to the desired city for which you know the current time.In most cases, this is a city that belongs to the same time zone as your home city.(4) Set the world time hands.Press the button A for 2 seconds.Press the button B to set the world time hands to indicate the time in the city you selected in the step (3) .(5) Push the crown back to the normal position.- The city hand turns a full round.Press the button A for 2 seconds here will allow you to resume the procedure again as indicated by the arrow if necessary.- The world time hands turn a full round.- If the alarm has been set and the crown is pulled out to the 2nd click position, the world time and alarm hands will turn to indicatethe current time.Tips : When setting the hands, the hand moves quickly if the button B is kept pressed.WORLD TIME & ALARM- World time- AlarmN → 1 → 2Button AButton BCrownDateMinute handCity hand World time minute handSmall second handHour handWorld time hour handAlarm minute handAlarm hour hand

/ 3

Related manuals for Epson YM26A