Epson VS75A Instruction Manual

Also see for VS75A: Manual

Contents

Instruction of Watch MovementCrown positionN : normal 1 : 1st click 2 : 2nd clickCrown Free Turn clockwise for datechange Time settingButton AStopwatch StartStopRestartStopwatch StartStopRestart[*1]Button BStopwatch ResetSplitSplit releaseStopwatch ResetSplitSplit release[*1] Display Crown and button operationCal. VS75A[*1] Stopwatch hand position adjustmentIf the stopwatch hands are not in the "0" position, follow the procedures below to set them.(1) Pull the crown out to the 2nd click position.(2) Set the stopwatch minute hand.Press the button A for 2 seconds.Press the button B repeatedly to set it to the "0" position.(3) Set the stopwatch 1/5 second hand.Press the button A for 2 seconds.Press the button B repeatedly to set it to the "0" position.(4) Push the crown back to the normal position.- The stopwatch minute hand turns a full round and can now be set to the correct position.- The stopwatch 1/5 second hand turns a full round and can now be set to the correct position.- When the stopwatch is measuring, if the crown is pulled out to the 2nd click position, it will be automatically reset.Tips: When setting the hands, the hand moves quickly if the button B is kept pressed.N → 1 → 2Button AButton BCrown24 hour handDateSmall second handMinute handHour handStopwatch 1/5 second handStopwatch minute handSOLAR SERIES- 1/5 sec. chronograph

/ 4

Related manuals for Epson VS75A