51Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or accesspoint. If there is no hardware button, there may be a virtual WPS button in the software for the device.Check your network product documentation for details.Using WPS to Connect to a NetworkParent topic: Wi-Fi or Wired NetworkingUsing WPS to Connect to a NetworkIf you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) toconnect your product to the network.1. Press the home button, if necessary.2. Press the icon.You see a screen like this:3. Select Wi-Fi (Recommended).4. Select Push Button Setup (WPS).5. Follow the instructions on the LCD screen to complete WPS setup.6. Press the home button to exit.You see the icon on the LCD screen and should be able to connect to your product directly fromyour computer or device, and then print. If you are printing from a computer, make sure you installedthe network software as described on the Start Here sheet.
