2376. Check the printed pattern to see if there are gaps in the lines.Print head is cleanPrint head needs cleaning• If there are no gaps, click Finish.• If there are gaps or the pattern is faint, click Clean to clean the print head again.If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours withoutprinting or longer if printing. Then try cleaning the print head again. If quality still does not improve,contact Epson.Parent topic: Print Head CleaningRelated tasksLoading Paper in the CassetteAligning the Print Head Using the Product Control PanelYou can align the print head using the control panel on your product.1. Make sure there are no errors on the LCD screen.2. Load a few sheets of plain paper in the product.3. Press the home button, if necessary.4. Select Maintenance.