Epson Stylus Pro 7700 Manual

Also see for Stylus Pro 7890 Series: User guide Brochure & specs Reference guide Setup guide Quick reference guide

Contents

PAGE 1 of 9 >>Epson Stylus Pro 7700/9700/7890/9890Network Printer Sharing1.) Ensure the network cable is connected to the printer and the printer is powered ON. To find your IPaddress, press the Right (menu) button located on the control panel of the printer (see FIGURE 1)FIGURE 12.) Press the Down button to locate/highlight NETWORK SETUP, then Press the Right button to selectNETWORK SETUP (see FIGURE 2).FIGURE 2NOTE: DHCP must be enabled in your network configuration. In a DHCP environment, the IPaddress may change periodically. As a result, this procedure will need to be repeated each timethe IP address changes.IMPORTANT: Before proceeding, please ensure the Epson (OEM) printer driver and SawgrassPowerDriver or Winprofile have been installed. For assistance with driver or profile installation, pleaserefer to the Installation Guide.121