Epson Stylus Photo RX620 Quick Manual

Also see for RX620 - Stylus Photo Color Inkjet: Update Instructional manual Specifications Start here Product information guide

Contents

75NoticesImportant Safety InstructionsBefore using your Epson Stylus Photo RX620, read and follow these safety instructions:■ Be sure to follow all warnings and instructions marked on the Stylus Photo RX620.■ Use only the type of power source indicated on the Stylus Photo RX620 label.■ Connect all equipment to properly grounded power outlets. Avoid using outlets onthe same circuit as air control systems or other high-load devices that regularly switchon and off.■ Place the Stylus Photo RX620 near a wall outlet where the plug can be easilyunplugged.■ Do not let the power cord become damaged or frayed.■ If you use an extension cord with the Stylus Photo RX620, make sure the totalampere rating of the devices plugged into the extension cord does not exceed thecord’s ampere rating. Also, make sure the total ampere rating of all devices pluggedinto the wall outlet does not exceed the wall outlet’s ampere rating.■ Avoid electrical outlets controlled by wall switches or automatic timers.■ Keep your Stylus Photo RX620 and computer system away from potential sources ofelectromagnetic interference, such as loudspeakers or cordless telephone base units.■ Avoid locations that are subject to rapid changes in heat or humidity, shocks orvibrations, or dust.■ Leave enough room around the Stylus Photo RX620 for sufficient ventilation.■ Do not place the Stylus Photo RX620 near a radiator or heating vent or in directsunlight.■ Place the Stylus Photo RX620 on a flat, stable surface that extends beyond its base inall directions. It will not operate properly if it is tilted or at an angle. Leave enoughspace in front of the Stylus Photo RX620 (at least 9 inches) so it doesn’t tip forwardand fall off of the work surface.■ Turn off and unplug the Stylus Photo RX620 before cleaning. Clean with a dampcloth only. Do not spill liquid on it.■ Always turn the Stylus Photo RX620 off using the P On button. Don’t turn offthe power using a switch on a power strip or unplug the Stylus Photo RX620 untilthe P On light and LCD panel turn off.