Epson PowerLite 1725 User Manual

Also see for 1735W - PowerLite WXGA LCD Projector: User guide User manual Operation guide Product support bulletin Product support bulletin

Contents

Setting Up Network Projection 91■ If your network assigns addresses automatically, turn on theDHCP setting.■ If your network does not assign addresses automatically, turnoff DHCP and enter the projector’s IP Address, SubnetMask, and Gateway Address, as needed.To enter numbers, use the buttons on the remotecontrol to highlight the number you want to input, then pressthe Enter button. When you’re finished changing an addressin the network menu, highlight Return, then press the Enterbutton.9. To prevent the IP address from appearing on the standby screen,set the IP Address Display setting to Off.When you’re done making all necessary changes, press Menu to exitthe menu system.Using Projector E-mail AlertsWhen this feature is enabled, the projector sends you an e-mail alert ifit has any problems.1. Press the Menu button on the remote control, select theNetwork menu, then press Enter.2. Choose Network Configuration and press Enter.