Epson PowerLite 1725 User Manual

Also see for 1735W - PowerLite WXGA LCD Projector: User guide User manual Operation guide Product support bulletin Product support bulletin

Contents

Displaying and Adjusting the Image 173. Press the red PPower button on the remote control or on top ofthe projector.The projector beeps once and the PPower light flashes green asthe projector warms up, then an image begins to appear. Whenthe PPower light stops flashing and remains green, the projectoris ready for use.4. If you are prompted to enter a password, see page 106.Using the Direct Power On FunctionThe Direct Power On function enables faster setup. The projector willstart up automatically when you plug it in; you won’t have to press thePPower button.Follow these steps to enable Direct Power On:1. Press the Menu button on the remote control and select theExtended menu.2. Choose Operation and press Enter.3. Choose Direct Power On and press Enter.4. Highlight On and press Enter.5. Press Esc or Menu to exit. The setting will take effect the nexttime you plug in the projector.warningNever look into the lenswhen the lamp is on. Thiscan damage your eyes, and isespecially dangerous forchildren.noteIf a power outage occurswhen Direct Power On isenabled and the projector isplugged in, the projector willrestart when the power isrestored.