Epson PowerLite 1720 Installation Handbook

Also see for 1730W - PowerLite WXGA LCD Projector: User guide User guide Parts list Quick setup guide Declaration of conformity

INSTALLATION HANDBOOKRemote Control InformationEpson PowerLite 1720 / 1730WUsing the Remote ControlFollow these tips for using the remote control:Point the remote control at the front of the projector or at thescreen.Stand within 20 feet of the projector.direct sunlight, or the projector may not respond properly.Replacing the BatteriesReplace the batteries as described below:1. Turn the remote control over.2. Press the tab on the battery coverto open it.3. Install two AA batteries,inserting the + and – endsas shown.4. Close the cover, pressing it downuntil it snaps into place.noteIf a button is pressed longerthan 30 seconds, the remotecontrol stops operating toconserve power. When yourelease the button, normaloperation resumes.cautionWhen replacing batteries,take the followingprecautions:Replace the batteries assoon as they run out. If thebatteries leak, wipe awayhands, wash immediately.Do not expose batteries toDispose of used batteriesaccording to localregulations.Remove the batteries ifyou won’t be using theprojector for a long period oftime.1