Epson L565 Service Manual

Also see for L565: User guide Start here User manual Start here

L565/L566 Series Revision AConfidentialDisassembly/Reassembly Disassembly/Reassembly Procedures 352.2.1.1 Printer Mechanism partsFlowchart 2-1. Printer Mechanism parts (1)STARTB (p 36)Hinge (p39)Housing Right(p39)Panel FFC Cover(p35)Panel Unit (p38)Housing Front(p38)Waste Ink PadAssy12(p 45) (p 56)S6Retard RollerAssy---2(p 56) CR Encoder FFC Extension spring (x2)The following parts can be replaced without removing the ADF/Scanner Unit. However,the working space for replacement is narrow and dark. Therefore, if you find it difficult towork, remove the ADF/Scanner Unit first before replacement. Printhead/Holder Board Paper Guide Front UnitPaper Support---4---Paper SupportSub---5---Paper GuideFront Unit2---(p 56)S7Printhead3---(p 47) (p 56)S10 Head FFCHolder Board---2---Housing Rear14(p 45)S6 Scanner FFC Grounding wire (x2)Panel FFC Cover1------S6E (p 38)2 (p 41)Tray Front Assy---4(p 56)1 (p 40)4 (p 41)Housing LeftAssy56(p 45)S6 S16C (p 37)F (p 39)D (p 38)Screw type/torque listSymbol Screw Type TorqueC.B.P-TITE (S-P1) SCREW 3x12 F/ZN-3C 6 ± 1 kgf · cmC.B.P-TITE SCREW 2.6x5 F/ZN-3C 6 ± 1 kgf · cmC.B.P-TITE SCREW 2x8 F/ZN-3C 2 ± 0.5 kgf · cmC.B.P-TITE SCREW 2x8 F/ZN-3C 2.5 kgf · cmC.B.P-TITE SCREW 2x8 F/ZN-3C 4 ± 1 kgf · cmC.B.P-TITE SCREW 3x10 F/ZB-3C 6 ± 1 kgf · cmC.B.P-TITE SCREW 3x10 F/ZN-3C 6 ± 1 kgf · cmC.B.P-TITE SCREW 3x10 F/ZN-3C 5 ± 1 kgf · cmC.B.P-TITE SCREW 2.5x8 F/ZN-3C 2.5 ± 0.5 kgf · cmC.B.P-TITE SCREW 3x10 F/ZN-3C 7 ± 1 kgf · cmC.B.P-TITE SCREW 3x8 F/ZN-3C 6 ± 1 kgf · cmC.B.P-TITE SCREW 3x6 F/ZN-3C 6 ± 1 kgf · cmC.B.S-TITE (P2) SCREW 3x6 F/ZN-3C 7 ± 1 kgf · cmC.B.S-TITE SCREW 2x4 F/ZN-3C 2 ± 0.5 kgf · cmC.B.S-TITE SCREW 3x8 F/ZN-3C 6 ± 1 kgf · cmC.B.S-TITE SCREW 3x6 F/ZB-3C 6 ± 1 kgf · cmC.B.S-TITE SCREW 3x6 F/ZN-3C 6 ± 1 kgf · cmC.B.S-TITE SCREW 3x6 F/ZN-3C 8 ± 1 kgf · cmC.B.S-TITE SCREW 3x6 F/ZN-3C 7 ± 1 kgf · cmC.P-TITE SCREW 3x4 F/ZN-3C 4 ± 1 kgf · cmC.B.S-TITE SCREW 3x8 F/ZB-3C 6 ± 1 kgf · cmS1S2S3S4S5S6S7S8S9S10S11S12S13S14S15S16S17S18S19S20S21ADF/ScannerUnit*12(p 44) (p 53)S6Paper BackLever---2(p 70)A (p 36)FFC CoverOuter---1(p 46)Adapter Cover(p36)Adapter (p36) Ink Supply Tank TubeTube Cover---4(p 52)3 (p 41)Ink Supply TankAssy------(p 50)Hinge (p39)Housing Right(p39)Note "*": When installing the ADF/Scanner Unit, make sure to do itwith the Paper Support and Paper Support Sub removed.