Epson Expression 1680 Start Here Manual

Also see for 1680 - Expression Special Edition: Brochure & specs Product support bulletin Manual Product support bulletin Product support bulletin

Contents

Start Here1 Make sure you have everything:2 Remove all the packing tape, but leave the two yellow stickers in placeuntil instructed to remove them.Unpack Your ScannerTurn over1ScannerCD-ROM withEPSON® Scan driverand electronic manualPower cordWait! You must install your software before connecting the scannerto your computer.Be sure to close all open programs and turn off any virusprotection programs.Windows ®1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.The installer starts automatically.If it doesn’t start, double-click My Computer (in Windows XP,click Start > My Computer), double-click EPSON, then double-clickEPSON.2 You see a message to close all running applications. Click OK.3 Read the license agreement, then click Agree.4 At the Software Installation screen, click Install.5 Wait for Epson Scan and the User’s Guide to be installed.6 At the last screen, click Exit. The EPSON Product Registrationscreen appears.7 Register your scanner as instructed. When finished, click Doneor close your browser. Remove your CD-ROM.Install the Software2EPSON Expression®1680USB cableSTOP: Be sure to install your scanner software firstBEFORE you connect the scanner!See your Start Here sheet for details.IMPORTANT!Leave the stickers in place untilyou are instructed to remove them.Macintosh®1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.(If necessary, double-click the EPSON CD-ROM icon to open it.)2 Double-click .3 You see a message to close all running applications. Click OK.4 Read the license agreement, then click Agree.5 When the Software Installation screen appears, click Install.6 Follow the on-screen instructions to install your User’s Guide.When you’re done installing the User’s Guide, click Quit.7 In Mac® OS X, enter your Administrator name and password whenprompted and click OK.8 Read the license agreement, then click Accept.9 When you see the EPSON Scan Installer screen, select EPSONExpression 1680 in the Easy Install menu and click Install.10 Mac OS X: At the last screen, click Exit. The EPSON ProductRegistration screen appears.Mac OS 8.6-9.x: When you’re done installing, restart your Macintosh.The EPSON Product Registration screen appears when yoursystem restarts.11 Register your scanner as instructed. When finished, click Doneor close your browser. Remove the CD-ROM.Click InstallClick InstallClick Install3 Connect the ScannerAfter your software is installed, it’s time to get connected.1 Remove the yellow tape from the back of the scanner.2 Slide the transportation lock to the UNLOCK position.Caution: Your scanner won’t work unless the transportation lock is inthe UNLOCK position. Also, you may damage the scanner if you leaveit on while it’s locked.3 Connect the scanner to your computer. Use either the USB cable thatcame with your scanner or a SCSI cable, if your computer has SCSIsupport. Don’t connect both cables.If you’re using USB...Plug the square end of the USB cable into the scanner’sUSB port. Plug the flat end into any available USB porton your computer or USB hub. Then go to step 4.Note: Your scanner may not work correctly if you use a USB cableother than the one supplied by EPSON, of if you connect your scannerto a multi-level USB hub system.STOP: Be sure to install your scanner software firstBEFORE you connect the scanner!See your Start Here sheet for details.If you’re using SCSI...If you have another SCSI device that uses SCSI ID 2, turn the SCSI IDswitch on the back of the scanner to a new number. Do not use 0 or 7.Unless your scanner is connected in the middle of a SCSI chain,leave the terminator switch on the back of the scanner turned ON.Squeeze the lock releases on your SCSI cable, and plug the cable intoeither SCSI connector on the back of the scanner. Connect the pin endof the cable to the SCSI port on your computer.4 Plug one end of the scanner’s power cord into the AC inlet at the backof the scanner, and the other end into a grounded electrical outlet.5 Press the power button on the front of the scanner to turn it on.The green READY light begins to flash. Wait for the flashing to stop.6 If you have a USB connection, go to “Your First Scan” on the back ofthis sheet.If you have a SCSI connection, start the Add Hardware Wizard in theWindows Control Panel and follow the on-screen instructions to letWindows detect your scanner. Then continue with the instructions onthe back of this sheet to begin scanning.continueClick Agree

/ 4

Related manuals for Epson 1680 - Expression Special Edition