Epson ELPDC12 Document Camera Quick Start Manual

Also see for DC-12: User guide

Contents

Quick StartFollow these instructions to display pages from books and documents, andthree-dimensional objects. To use other features, see the online User’s Guide.It provides instructions for using the microscope adapter, capturing stillimages, and using the included software.Before using the product, make sure you read the safety instructions in theonline User’s Guide.Setting up the product1 Raise the camera arm.2 Connect your projector. Use a VGA cable (included), a composite videocable (not included), or an HDMI cable (not included).Composite video cableVGA cableHDMI cable3 Connect the power adapter.4 Press the power button to turn on the document camera.5 Turn on your projector. Then select the source (port) on the projectorthat lets you display the camera image. On the document camera, pressthe Source button, if necessary.Using the product1 Place your document on the table under the camera head. Align thecenter of your document with the mark on the side of the documentmark on the side of the documentcamera.2 Slide the lamp switch to illuminate the document.Lamp switch3 Turn the rotation dial on the camera head to rotate the image.Rotation dial4 Press the Focus button on the document camera or the Auto Focusbutton on the remote control. Your document is automatically focused.5 To zoom in or out on part of the image, press the Zoom or button.Note: You can also use the remote control to adjust the image.6 To record audio with your video lessons, use the built-in microphone.MicrophoneWhen you’re done using the product, turn it off and lower the camera arm asshown.Epson® DC-12 Document Camera (ELPDC12)*412492700**412492700*

/ 4

Related manuals for Epson DC-12