Epson ELPDC11 Document Camera Quick Start Manual

Contents

Quick StartFollow these instructions to display pages from books, documents, andthree-dimensional objects. To use other features, see the User’s Guide on theDocument CD-ROM. It provides instructions for using the microscope adapter,capturing still images, and using the included software.Before using the product, make sure you read the safety instructions in theUser’s Guide on the Document CD-ROM.Setting Up the Product1 Raise the camera arm.2 Connect your projector. Use a VGA cable (included) or a composite videocable (check your projector for available ports).Composite video cableVGA cable3 Connect the power adapter.4 Press the power button to turn on the document camera.5 Turn on your projector. Then select the source (port) on the projectorthat lets you display the camera image. On the document camera, pressthe Source button, if necessary.Using the Product1 Place your document on the table under the camera head.2 Slide the lamp switch to illuminate the document.Lamp switch3 Turn the dial on the camera head to rotate the image on the screen.4 Press the Focus button. Your document is automatically focused.5 To zoom in on part of the image, press the Zoom or button.Note: You can also use the remote control to adjust the image.When you’re done using the product, turn it off and lower the camera arm asshown. It cannot be folded flat.Caution: To avoid damage, do not try to press the arm flat or foldit backwards.Epson DC-11 Document Camera (ELPDC11)

/ 4

Related manuals for Epson DC-11