Epson EF-100WATV Quick Setup Manual

Also see for EF-100 Series: User guide

Quick SetupIMPORTANT: Before using this product, make sure you read these instructionsand the safety instructions in the online User’s Guide.ContentsMake sure your projector box includes all of these parts:You can place the projector on almost any flat surface. See the online User’sGuide for more information.Connect the projectorStreaming deviceConnect the included Android TV streaming device to your projector. To streamcontent, make sure you have an active streaming account and enter your logininformation as necessary for each app.Note: To connect other streaming devices, see the online User’s Guide for moreinformation. The projector’s HDMI port does not support MHL®.1 Remove the rear cover of the projector.2 Open the USB power cable clamp.3 Connect the streaming device to the projector’s HDMI extension cable.4 Connect the USB power cable to the streaming device and fit the devicesecurely inside the projector.Caution: Do not force the device into the projector; you may damage theprojector and/or the device.5 Make sure the device is securely connected as shown below. Pass the USBpower cable through the clamp, then close the clamp to secure the cable.6 Replace the rear cover of the projector.Note: To pair a Bluetooth® speaker or to connect an external speaker orheadphones to your projector, see the online User’s Guide.External video sourceYou can connect an external video source with an HDMI cable (not included).Caution: Do not turn on the video source before connecting it to the projector;you may damage the projector.Note: Some external video sources may require an optional HDMI adaptercable.1 Remove the rear cover of the projector.2 Connect an HDMI cable to your video source’s HDMI output port.3 Connect the other end of the HDMI cable to the projector’s HDMIextension cable.4 Pass the HDMI cable through the cable path as shown.EF-100WATV/EF-100BATV

/ 4

Related manuals for Epson EF-100 Series