Epson EX31 Quick Setup Manual

Also see for EX51: User guide Declaration of conformity Parts list Brochure & specs User guide

Contents

Quick SetupBefore using the projector, make sure you read the safety instructions in theUser’s Guide on your projector CD.Connect the projectorChoose from the following connections:Computer Monitor PortConnect a computer using the VGA cable that came with the projector.Connect one end to the projector’s Computer (Component Video) port,and the other end to your computer’s monitor port. If you are using anotebook, switch it to external display. You can also connect an audio cable.Computer USB Port (Windows® only)Connect a computer using the USB cable that came with the projector.Connect the square end of the USB cable to the projector’s Type B(square) USB port. Connect the flat end of the cable to any USB port on yourcomputer. You can also connect an audio cable.Follow the on-screen instructions to install the Epson USB Display software(only on first connection). Then press the USB button on the remote control.Video Player (EX31)Connect up to 3 video devices and use the remote control to switch betweenthem.RCA video cable(composite video)(optional)S-Videocable(optional)Component videoto VGA cable(optional)Audio out cable(optional)Audio in cable(optional)EX31/EX51/EX71*411760600**411760600*